fixing makeup

How to Fix Broken Makeup

There are few worse feelings than dropping a large sum of money on a designer makeup something-or-other, only to accidentally break it by its second or third use. All it takes is one overzealous swipe of a brand new lipstick shade until the tip breaks off from the tube and is rolling around on the floor, or one miscalculated reach for a brush, and that brand-new contour palette is in powdery shards on the bathroom counter top. However its been broken, here’s how to fix it:

Powders:

This category encompasses the majority of breakage. One wrong bump and the contents seem to fall apart. If broken compacts and palettes are a problem, luckily, they are super easy to fix.

image credit


Place as many pieces as possible back into the original pan. Add a few, tiny drops of rubbing alcohol over the mess. The powder will become very soft and pliable once the alcohol is added. Use something like a butter knife, clean fingertip, or toothpick to push and mold the softened powder back into shape. Let it dry overnight. The alcohol will evaporate, leaving the powder uniform again. It may not be as pretty as before, but it will still work just the same.

If the powder is too broken/just too powdery to reconstitute in the pan with alcohol, it can always be ground up and stored in a empty container to be used as loose powder.

Lipsticks:

Lipsticks have a knack for randomly breaking, especially, it seems, they newer and more expensive they are. Here are two things that can salvage a lipstick gone rouge.


The first option is to reattach the remaining lipstick in the tube to the part that has broken off. Make sure to at least wipe off the outside of the lipstick, especially if has touched the floor. Next, take a match or lighter and heat the top of the lipstick that is still inside the tube. Be very careful not to overheat and completely melt the lipstick; it should be gooey, not runny. Once the lipstick inside the tube has been heated, gently press the broken portion on top of the melted portion. Use a clean finger or spoon/knife to smooth out the edges. Let it chill in the refrigerator for 30 minutes to an hour. After it cools completely, its ready to be used once again!

If a lipstick breaks and dealing with it potentially breaking again doesn’t sound too appealing, creating a lipstick palette may be a good alternate option (or just a funny, rainy afternoon project!). All that is needed is a lighter or match (heat source), a small spoon or bowl, an empty container/palette (empty eye shadow ones work amazingly well), toothpicks/ butter knife, and of course, broken lipstick(s). The first step is to take an appropriate amount of lipstick (what will fit in the container) and place it into the spoon/bowl. Slowly heat up the lipstick from underneath the bowl while stirring the lipstick with a toothpick or butter knife. Keep in mind that it takes very little heat for lipstick to melt. Once the lipstick reaches a consistency that it can easily be poured, go ahead and use it to fill the palette. Lipstick expands as it cools so leave a little space for expansion at the top. Use the back of a spoon or a knife to smooth the surface of the lipstick. After it cools, it is ready to use.

This method makes it easy to use favorite lipstick shades as blushers as well.

If more lipstick shades are going to be used, be sure to clean the “mixing spoon”/bowl to not contaminate shade integrity. Customized shades could potentially be mixed and poured as well. Don’t be afraid of getting creative!

Has anyone tried any of these before? The alcohol+powder trick has saved me more than once:) Thanks for reading!

 

 

Advertisements